UTP protector 24 port Rack Mount (2RU) RJ45 patch panel for 1000BaseT, CAT5 & CAT6 hubs and power over Ethernet protection - NO CABLES INCLUDE
Rated 3.5/5 based on 11 customer reviews
  • Product SKU: RJ45-24CAT6

UTP protector 24 port Rack Mount (2RU) RJ45 patch panel for 1000BaseT, CAT5 & CAT6 hubs and power over Ethernet protection - NO CABLES INCLUDE

  • Easy to connect between mid- or end-span PoE source and device using Cat5e/6/6a cabling
  • Dustproof, shockproof and IP66-rated to endure powerful jets of water from any direction
  • Supports 802.3af/at/bt IEEE standards and Ethernet data speeds up to 1 Gbps
  • Plug-and-play operation with no external power required for immediate installation
  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
  • Ethernet Surge Protector for Gigabit GbE PoE / High PoE + (HPoE) 1000 Mbps LAN Ethernet
  • Gas discharge tubes for full protection GDT - lightning arrestor RJ45 cable CAT6 / CAT5 protection
  • Aluminum housing, 12 AWG ground wire, line line protection, bi-directional clamp, 5KA 8 / 20μs
  • Thunder Arrestor protects computer network equipment devices such as router, modem, camera, switch, etc.
  • Mounting flanges provide option for screw mounting to wall, electrical panel, or network cabinet.

Novaris network protection products are specifically designed for the protection of twisted pair Ethernet systems with a combination of rugged and fine grain protection elements.

The RJ45-CAT6 and RJ45-PoE protection products employ a 10kA Gas Discharge Tube per signal pair to dissipate the energy associated with large common mode surges.The silicon based secondary protection element used on each signal pair provides exceptional protection for your equipment whilst allowing network speeds up to Gigabit/1000BaseT.

The Novaris RJ45-CAT6 surge protector is designed to provide the highest levels of protection for shielded twisted pair (STP) and unshielded twisted pair (UTP). The unit offers 10,000 A protection and has the ability to have one device used for both applications.

The product is designed for protection of and to be fully compatible with 10/100 Gb and RJ45-1PoE for use with PoE, 802.3 at high power profile and non-standard powered applications such as high-power PoE and Ultra PoE, PTZ+, with up to 1 A per two pairs for a total of 100+ W applications utilising all pairs for power.

Flying lead and DIN rail options come standard; EC90 option for field end STP installations must be ordered as an extra. The curved design with adaptable base slot enables ease of mounting in any application. The unit is also available in 19″ rack 2RU 8-, 16- and 24-way, RJ45-8CAT6, RJ45-16CAT6 and RJ45-24CAT6.

  • Easy to connect between mid- or end-span PoE source and device using Cat5e/6/6a cabling
  • Dustproof, shockproof and IP66-rated to endure powerful jets of water from any direction
  • Supports 802.3af/at/bt IEEE standards and Ethernet data speeds up to 1 Gbps
  • Plug-and-play operation with no external power required for immediate installation
  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
  • Ethernet Surge Protector for Gigabit GbE PoE / High PoE + (HPoE) 1000 Mbps LAN Ethernet
  • Gas discharge tubes for full protection GDT - lightning arrestor RJ45 cable CAT6 / CAT5 protection
  • Aluminum housing, 12 AWG ground wire, line line protection, bi-directional clamp, 5KA 8 / 20μs
  • Thunder Arrestor protects computer network equipment devices such as router, modem, camera, switch, etc.
  • Mounting flanges provide option for screw mounting to wall, electrical panel, or network cabinet.

Novaris network protection products are specifically designed for the protection of twisted pair Ethernet systems with a combination of rugged and fine grain protection elements.

The RJ45-CAT6 and RJ45-PoE protection products employ a 10kA Gas Discharge Tube per signal pair to dissipate the energy associated with large common mode surges.The silicon based secondary protection element used on each signal pair provides exceptional protection for your equipment whilst allowing network speeds up to Gigabit/1000BaseT.

The Novaris RJ45-CAT6 surge protector is designed to provide the highest levels of protection for shielded twisted pair (STP) and unshielded twisted pair (UTP). The unit offers 10,000 A protection and has the ability to have one device used for both applications.

The product is designed for protection of and to be fully compatible with 10/100 Gb and RJ45-1PoE for use with PoE, 802.3 at high power profile and non-standard powered applications such as high-power PoE and Ultra PoE, PTZ+, with up to 1 A per two pairs for a total of 100+ W applications utilising all pairs for power.

Flying lead and DIN rail options come standard; EC90 option for field end STP installations must be ordered as an extra. The curved design with adaptable base slot enables ease of mounting in any application. The unit is also available in 19″ rack 2RU 8-, 16- and 24-way, RJ45-8CAT6, RJ45-16CAT6 and RJ45-24CAT6.

  • Easy to connect between mid- or end-span PoE source and device using Cat5e/6/6a cabling
  • Dustproof, shockproof and IP66-rated to endure powerful jets of water from any direction
  • Supports 802.3af/at/bt IEEE standards and Ethernet data speeds up to 1 Gbps
  • Plug-and-play operation with no external power required for immediate installation
  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
  • Ethernet Surge Protector for Gigabit GbE PoE / High PoE + (HPoE) 1000 Mbps LAN Ethernet
  • Gas discharge tubes for full protection GDT - lightning arrestor RJ45 cable CAT6 / CAT5 protection
  • Aluminum housing, 12 AWG ground wire, line line protection, bi-directional clamp, 5KA 8 / 20μs
  • Thunder Arrestor protects computer network equipment devices such as router, modem, camera, switch, etc.
  • Mounting flanges provide option for screw mounting to wall, electrical panel, or network cabinet.
Maximum continuous voltage AC: 4 V DC: 6V
Dimensions 80x27.5x26.5 mm
IP IP 20 / indoor
Approximate Weight 2000 g
Mounting Type Inline / TS35 DIN rail
Voltage protection level (Up) (line-line) : 20 V (line-earth) : 350 V
Total discharge current(8/20) 5 kA per line (10 kA common mode)
Total discharge current(10/350) 1 kA per line (2 kA common mode)
Interface port RJ45-1CAT6 , RJ45-1PoE
Response time instantaneous

 

Orders are processed: Monday to Friday from 9am – 5pm.

Orders are shipped within 24 hours of being placed.

Shipping Times: 

Within Victoria - Next day delivery

NSW Metro - Overnight service

NSW Country - 2-3 business days

QLD - 3-5 business days

SA - Overnight service

WA - 5 business days.

(Public Holidays Excluded)

Order Confirmation: After placing an order, you will receive an order confirmation by e-mail. This means we’ve received your order in our system and have pre-authorised your credit card for the purchase. If your item is unavailable, we will void the pre-authorisation charge and contact you to inform you by e-mail. If your item(s) are available for immediate shipment (within 2 business days), we will process the charges and submit the order for shipment.

Tracking Numbers will be sent to your email once your order has shipped.

In some cases, we may need to contact you before your order can be shipped. To ensure there is no delay, please respond to any email/phone call from our Customer Service team.

We proudly use TNT, Star Track or Couriers Please depending on location.

RETURNS

You have 14 calendar days to return an item from the date you received it. Your item must be in the same condition that you received it. We appreciate if you can return your item in the original packaging. Your item needs to have the receipt or proof of purchase email. You must contact us before returning your item so that we can give you an RMA number and the most applicable shipping address based on your location. You can contact us at sales@gsasystems.com.au and we will respond promptly.

For more information, refer to our full policy.