USB wifi adaptors for 5000 series Dahua NVRs only
Rated 3.5/5 based on 11 customer reviews
  • Product SKU: USB WIFI Adapter

USB wifi adaptors for 5000 series Dahua NVRs only

  • Operates with most Dahua Technology and EZ-IP XVRs / DVRs / NVRs and Dahua Technology OEMs like X-Security, Qvis iApollo models, IC Realtime - please refer to below
  • Turns all your non wifi devices into wifi compatible devices (depending on user interface) - e.g. set top boxes, android boxes, older computer and laptop models etc.
  • Plug and Play connection to your Wifi
  • Compatible with IEEE 802.11b & IEEE 802.11n
  • Supports speeds up to 150 Mbps, depending on distance and interference
  • Supports security encryption, IEEE 802.1x & 802.11i authentication, TKIP / AES encryption, 64/128-bit WEP encryption, WPA2-PSK
  • USB 2.0 interface (compatible to USB 2.0 or higher)
  • Supports distances of up to 100 meters (open space)**
  • Supports Windows 10 / 8.1 / 8 / 7 / ME / 2000 / XP / Vista, Linux and Mac
  • Seamlessly compatible with 802.11b/g/n devices

This should only be used with a limited number of cameras due to wireless bandwidth limitations. Be sure to keep the bit rate below what the USB Wifi adapter can handle.

Connect the Wi-Fi adapter to any free USB interface of your DVR / XVR / NVR. Preferred interface would be one at the back of the recorder (directly soldered to the main board), but any other USB port should do as well.
It may take 1 to 2 minutes until the Wi-Fi Adapter is recognised and all available SSIDs are visible in the recorder's interface. If after two minutes still no SSIDs are listed, please hit the "refresh" button.
To connect to a secured Wi-Fi network you need to make sure to put in the password in the exact way, otherwise the recorder may return an error message "connection failed". In that case unplug and re-plug the Wi-Fi adapter from the USB port and repeat the setup. In worst case a factory default may be required. This is not an issue with the Wi-Fi adapter, but a firmware issue with the recorder.

The simple way to connect your DVR / NVR to the internet via Wi-Fi:

Simply plug the wifi dongle into a free USB port of your DVR / NVR, select your Wifi and type in your Wifi passwort - ready to connect!

Works with neary all wifi routers, incl. Three, Vodafone, Meteor, Eir.

No need to wire, simple plug and play operation.

Works with most of our Dahua DVRs / NVRs / XVRs (previous and current), EZ-IP and also with most of our X-Security DVRs / XVRs / NVRs.

This high reinforcement ALPHA wifi usb adapter is made for 2.4 GHz Wi-Fi standard (IEEE 802.11 b/g/n) and supported data connections up to 150Mbps. the powerful Ralink RT3070 chipset supported long distances and improved the signal quality. Even when used with thick concrete walls, guarantees Alfa networks no signal loss and optimized the TX and RX communications. This Dahua Linux wifi usb dongle is equipped with an external RP-SMA antenna and can be purchased for a stronger antenna. Supersimple connection with a pc/laptop with USB. The easy installation makes sure that you are online in seconds. This wifi usb adapter is ready for Windows XP/Vista/7/8, Linux (2.6.37), Mac OS (10.4-10.12)-64 Bit 32 &! And this version can also be used as trackback!

  • Operates with most Dahua Technology and EZ-IP XVRs / DVRs / NVRs and Dahua Technology OEMs like X-Security, Qvis iApollo models, IC Realtime - please refer to below
  • Turns all your non wifi devices into wifi compatible devices (depending on user interface) - e.g. set top boxes, android boxes, older computer and laptop models etc.
  • Plug and Play connection to your Wifi
  • Compatible with IEEE 802.11b & IEEE 802.11n
  • Supports speeds up to 150 Mbps, depending on distance and interference
  • Supports security encryption, IEEE 802.1x & 802.11i authentication, TKIP / AES encryption, 64/128-bit WEP encryption, WPA2-PSK
  • USB 2.0 interface (compatible to USB 2.0 or higher)
  • Supports distances of up to 100 meters (open space)**
  • Supports Windows 10 / 8.1 / 8 / 7 / ME / 2000 / XP / Vista, Linux and Mac
  • Seamlessly compatible with 802.11b/g/n devices

      

This should only be used with a limited number of cameras due to wireless bandwidth limitations. Be sure to keep the bit rate below what the USB Wifi adapter can handle.

Connect the Wi-Fi adapter to any free USB interface of your DVR / XVR / NVR. Preferred interface would be one at the back of the recorder (directly soldered to the main board), but any other USB port should do as well.
It may take 1 to 2 minutes until the Wi-Fi Adapter is recognised and all available SSIDs are visible in the recorder's interface. If after two minutes still no SSIDs are listed, please hit the "refresh" button.
To connect to a secured Wi-Fi network you need to make sure to put in the password in the exact way, otherwise the recorder may return an error message "connection failed". In that case unplug and re-plug the Wi-Fi adapter from the USB port and repeat the setup. In worst case a factory default may be required. This is not an issue with the Wi-Fi adapter, but a firmware issue with the recorder.

The simple way to connect your DVR / NVR to the internet via Wi-Fi:

Simply plug the wifi dongle into a free USB port of your DVR / NVR, select your Wifi and type in your Wifi passwort - ready to connect!

Works with neary all wifi routers, incl. Three, Vodafone, Meteor, Eir.

No need to wire, simple plug and play operation.

Works with most of our Dahua DVRs / NVRs / XVRs (previous and current), EZ-IP and also with most of our X-Security DVRs / XVRs / NVRs.

This high reinforcement ALPHA wifi usb adapter is made for 2.4 GHz Wi-Fi standard (IEEE 802.11 b/g/n) and supported data connections up to 150Mbps. the powerful Ralink RT3070 chipset supported long distances and improved the signal quality. Even when used with thick concrete walls, guarantees Alfa networks no signal loss and optimized the TX and RX communications. This Dahua Linux wifi usb dongle is equipped with an external RP-SMA antenna and can be purchased for a stronger antenna. Supersimple connection with a pc/laptop with USB. The easy installation makes sure that you are online in seconds. This wifi usb adapter is ready for Windows XP/Vista/7/8, Linux (2.6.37), Mac OS (10.4-10.12)-64 Bit 32 &! And this version can also be used as trackback!

  • Operates with most Dahua Technology and EZ-IP XVRs / DVRs / NVRs and Dahua Technology OEMs like X-Security, Qvis iApollo models, IC Realtime - please refer to below
  • Turns all your non wifi devices into wifi compatible devices (depending on user interface) - e.g. set top boxes, android boxes, older computer and laptop models etc.
  • Plug and Play connection to your Wifi
  • Compatible with IEEE 802.11b & IEEE 802.11n
  • Supports speeds up to 150 Mbps, depending on distance and interference
  • Supports security encryption, IEEE 802.1x & 802.11i authentication, TKIP / AES encryption, 64/128-bit WEP encryption, WPA2-PSK
  • USB 2.0 interface (compatible to USB 2.0 or higher)
  • Supports distances of up to 100 meters (open space)**
  • Supports Windows 10 / 8.1 / 8 / 7 / ME / 2000 / XP / Vista, Linux and Mac
  • Seamlessly compatible with 802.11b/g/n devices

      

Hardware

Main Chipset

Ralink RT5370

Host interface

USB 2.0/1.1 Type A

LED

Link/ Activity

RF Performance

Standards

IEEE802.11b/g & 802.11n (1T1R mode, 150Mbps)

Antenna

2dBi undetachable antenna

Operation Frequency

2412~2483.5 MHz (varies according to different regions).

 

Typical TPower (E.R.I.P)

802.11b (CCK)11Mbps: 19+/-1dBm802.11g (OFDM) 54Mbps:

16+/-1dBm

802.11n (HT20@MCS7), 15+/-1dBm802.11n (HT40@MCS7),15+/-1dBm

 

Receive Sensitivity

802.11b: -86+/-1dBm802.11g: -74+/-1dBm

802.11n (HT20), -70+/-1dBm802.11n (HT40), -70+/-1dBm

Software Support

Operation System

WindowsCE/2000/XP/Vista/7; Linux 2.6.X; Mac OS X

Security

WEP 64/128bit , WPA, WPA2, 802.1x, and 802.11i,Cisco CCS Compliant

Operation conditions

Voltage Range/Current

DC 5.0± 5% / <160mA

Temperature

Operation: -10°C - 60°CStorage:-20°C - 70°C

Humidity(Non-Condensing)

Operation: RH 95%Storage RH 95%

Physical Specification

Dimensions

(Main body)16.4x14.7x58mm

Net Weight

9.8 g

Orders are processed: Monday to Friday from 9am – 5pm.

Orders are shipped within 24 hours of being placed.

Shipping Times: 

Within Victoria - Next day delivery

NSW Metro - Overnight service

NSW Country - 2-3 business days

QLD - 3-5 business days

SA - Overnight service

WA - 5 business days.

(Public Holidays Excluded)

Order Confirmation: After placing an order, you will receive an order confirmation by e-mail. This means we’ve received your order in our system and have pre-authorised your credit card for the purchase. If your item is unavailable, we will void the pre-authorisation charge and contact you to inform you by e-mail. If your item(s) are available for immediate shipment (within 2 business days), we will process the charges and submit the order for shipment.

Tracking Numbers will be sent to your email once your order has shipped.

In some cases, we may need to contact you before your order can be shipped. To ensure there is no delay, please respond to any email/phone call from our Customer Service team.

We proudly use TNT, Star Track or Couriers Please depending on location.

RETURNS

You have 14 calendar days to return an item from the date you received it. Your item must be in the same condition that you received it. We appreciate if you can return your item in the original packaging. Your item needs to have the receipt or proof of purchase email. You must contact us before returning your item so that we can give you an RMA number and the most applicable shipping address based on your location. You can contact us at sales@gsasystems.com.au and we will respond promptly.

For more information, refer to our full policy.