Ubiquiti Rocket AC Prism Gen2 5GHz Radio with speeds up to 500+Mbps
Rated 3.5/5 based on 11 customer reviews
  • Product SKU: RP-5AC-Gen2

Ubiquiti Rocket AC Prism Gen2 5GHz Radio with speeds up to 500+Mbps

  • High Performance: Deploy the Rocket Prism 5AC Gen 2 for PtP or PtMP links in high RF noise environments to take full advantage of its design and capabilities
  • airPrism Sector Antenna: You can mount three Rocket Prism 5AC Gen 2 radios on the airPrism 5GHz 3x30° HD Sector Antenna for PtMP links
  • Dedicated Management Radio: Access the airOS configuration interface instantly through the UMobile app to set up and manage your Rocket 5AC Prism Gen 2
  • Robust Die Cast Aluminum Casing: Helps protect the Rocket Prism 5AC Gen 2 against electromagnetic interference
  • GPS for Superior Co-Location Performance: Precise GPS frame synchronization enable co-located Rocket Prism 5AC Gen 2 radios to transmit and receive data without interfering with each other, allowing for better frequency reuse and increased network stability
  • Improved Surge Protection: Utilizes the latest ESD protection to help protect against power surges
  • Gigabit Ethernet: Delivers high throughput over its wired connection
  • Plug and Play: Every airMAX antenna has a built-in Rocket mount, so no tools are needed for installation
  • Access Point PtMP airMAX Mixed Mode
  • airMAX ac Protocol Support
  • Long-Range Point-to-Point (PtP) Link Mode
  • Selectable Channel Width - PtP: 10/20/30/40/50/60/80 MHz & PtMP: 10/20/30/40 MHz
  • Automatic Channel Selection
  • Transmit Power Control: Automatic/Manual
  • Automatic Distance Selection (ACK Timing)
  • Strongest WPA2 Security
The Ubiquiti Networks RP-5AC-Gen2 US utilizes airPrism technology to provide breakthrough radio selectivity in unlicensed wireless band performance. airPrism technology isolates signals within the operating channel to increase capacity and throughput in co-location deployments. Rocket Prism 5AC features EMI shielded metal housing, GPS, airPrism, circuitry, and the airView real-time spectrum analyzer to deliver maximum spectral efficiency/throughput.

Designed to mount and interface with the Ubiquiti Networks RocketDish, the RP-5AC-GEN2 rocket PRISM AC-Gen2 5 GHz airMAX ac Radio BaseStation from Ubiquiti Networks uses airMAX ac technology to provide up to 500+ Mbps throughput. With a die-cast aluminum enclosure, this BaseStation can be installed in some of the harshest conditions, allowing for the data signal to reach greater distances. Inside the enclosure, you will find an Atheros MIPS 74Kc processor complete with 128MB of DDR2 RAM for enhanced processing power to allow for a stronger, more stable signal. Ports on the BaseStation include one Gigabit Ethernet port and two waterproof RP-SMA RF connections to prevent against water damage.

The BaseStation is capable of operating in both Access Point and Station modes allowing you to configure it to suit a variety of networking needs. Integrated QoS functionality allocates network resources to provide enhanced streaming of data while the airMAX engine with custom IC improves TDMA latency. Improved TDMA latency greatly increases data throughput and provides enhanced network speeds.

Worldwide 5 GHz Coverage

Deploy the Rocket Prism 5AC Gen 2 anywhere in the world. It delivers complete coverage of the 5 GHz spectrum with a single radio. The Rocket Prism 5AC Gen 2 allows for flexibility in configuring channel bandwidths (subject to local country regulations).
  • High Performance: Deploy the Rocket Prism 5AC Gen 2 for PtP or PtMP links in high RF noise environments to take full advantage of its design and capabilities
  • airPrism Sector Antenna: You can mount three Rocket Prism 5AC Gen 2 radios on the airPrism 5GHz 3x30° HD Sector Antenna for PtMP links
  • Dedicated Management Radio: Access the airOS configuration interface instantly through the UMobile app to set up and manage your Rocket 5AC Prism Gen 2
  • Robust Die Cast Aluminum Casing: Helps protect the Rocket Prism 5AC Gen 2 against electromagnetic interference
  • GPS for Superior Co-Location Performance: Precise GPS frame synchronization enable co-located Rocket Prism 5AC Gen 2 radios to transmit and receive data without interfering with each other, allowing for better frequency reuse and increased network stability
  • Improved Surge Protection: Utilizes the latest ESD protection to help protect against power surges
  • Gigabit Ethernet: Delivers high throughput over its wired connection
  • Plug and Play: Every airMAX antenna has a built-in Rocket mount, so no tools are needed for installation
  • Access Point PtMP airMAX Mixed Mode
  • airMAX ac Protocol Support
  • Long-Range Point-to-Point (PtP) Link Mode
  • Selectable Channel Width - PtP: 10/20/30/40/50/60/80 MHz & PtMP: 10/20/30/40 MHz
  • Automatic Channel Selection
  • Transmit Power Control: Automatic/Manual
  • Automatic Distance Selection (ACK Timing)
  • Strongest WPA2 Security
The Ubiquiti Networks RP-5AC-Gen2 US utilizes airPrism technology to provide breakthrough radio selectivity in unlicensed wireless band performance. airPrism technology isolates signals within the operating channel to increase capacity and throughput in co-location deployments. Rocket Prism 5AC features EMI shielded metal housing, GPS, airPrism, circuitry, and the airView real-time spectrum analyzer to deliver maximum spectral efficiency/throughput.

Designed to mount and interface with the Ubiquiti Networks RocketDish, the RP-5AC-GEN2 rocket PRISM AC-Gen2 5 GHz airMAX ac Radio BaseStation from Ubiquiti Networks uses airMAX ac technology to provide up to 500+ Mbps throughput. With a die-cast aluminum enclosure, this BaseStation can be installed in some of the harshest conditions, allowing for the data signal to reach greater distances. Inside the enclosure, you will find an Atheros MIPS 74Kc processor complete with 128MB of DDR2 RAM for enhanced processing power to allow for a stronger, more stable signal. Ports on the BaseStation include one Gigabit Ethernet port and two waterproof RP-SMA RF connections to prevent against water damage.

The BaseStation is capable of operating in both Access Point and Station modes allowing you to configure it to suit a variety of networking needs. Integrated QoS functionality allocates network resources to provide enhanced streaming of data while the airMAX engine with custom IC improves TDMA latency. Improved TDMA latency greatly increases data throughput and provides enhanced network speeds.

Worldwide 5 GHz Coverage

Deploy the Rocket Prism 5AC Gen 2 anywhere in the world. It delivers complete coverage of the 5 GHz spectrum with a single radio. The Rocket Prism 5AC Gen 2 allows for flexibility in configuring channel bandwidths (subject to local country regulations).
  • High Performance: Deploy the Rocket Prism 5AC Gen 2 for PtP or PtMP links in high RF noise environments to take full advantage of its design and capabilities
  • airPrism Sector Antenna: You can mount three Rocket Prism 5AC Gen 2 radios on the airPrism 5GHz 3x30° HD Sector Antenna for PtMP links
  • Dedicated Management Radio: Access the airOS configuration interface instantly through the UMobile app to set up and manage your Rocket 5AC Prism Gen 2
  • Robust Die Cast Aluminum Casing: Helps protect the Rocket Prism 5AC Gen 2 against electromagnetic interference
  • GPS for Superior Co-Location Performance: Precise GPS frame synchronization enable co-located Rocket Prism 5AC Gen 2 radios to transmit and receive data without interfering with each other, allowing for better frequency reuse and increased network stability
  • Improved Surge Protection: Utilizes the latest ESD protection to help protect against power surges
  • Gigabit Ethernet: Delivers high throughput over its wired connection
  • Plug and Play: Every airMAX antenna has a built-in Rocket mount, so no tools are needed for installation
  • Access Point PtMP airMAX Mixed Mode
  • airMAX ac Protocol Support
  • Long-Range Point-to-Point (PtP) Link Mode
  • Selectable Channel Width - PtP: 10/20/30/40/50/60/80 MHz & PtMP: 10/20/30/40 MHz
  • Automatic Channel Selection
  • Transmit Power Control: Automatic/Manual
  • Automatic Distance Selection (ACK Timing)
  • Strongest WPA2 Security
Frequency (GHz) 5
Transmission speed max (Mbps) 500
Standards 802.11a/n/ac
Output for an external antenna yes
TX Power regulation ano
Max. output power (dBm) 28
Sensitivity (dBm) -96
Modulation BPSK, QPSK, 16QAM, 64QAM, 256QAM
Encryption WPA2-AES
LAN port 1 x RJ45 10/100/1000
Default IP 192.168.1.20
Default name ubnt
Default password ubnt
Power supply (V) 24V, 1A GigE PoE
Consuption (W) 9,5
Procesor Atheros MIPS 74KC
RAM (MB) 128
NAND (MB) 16
Weight (kg) 0,400
Height (mm) 230
Width (mm) 88
Depth (mm) 40
Powering min (PoE) (V) 18
Powering max (PoE) (V) 26
Max. operating temperature (°C) 80

 

Orders are processed: Monday to Friday from 9am – 5pm.

Orders are shipped within 24 hours of being placed.

Shipping Times: 

Within Victoria - Next day delivery

NSW Metro - Overnight service

NSW Country - 2-3 business days

QLD - 3-5 business days

SA - Overnight service

WA - 5 business days.

(Public Holidays Excluded)

Order Confirmation: After placing an order, you will receive an order confirmation by e-mail. This means we’ve received your order in our system and have pre-authorised your credit card for the purchase. If your item is unavailable, we will void the pre-authorisation charge and contact you to inform you by e-mail. If your item(s) are available for immediate shipment (within 2 business days), we will process the charges and submit the order for shipment.

Tracking Numbers will be sent to your email once your order has shipped.

In some cases, we may need to contact you before your order can be shipped. To ensure there is no delay, please respond to any email/phone call from our Customer Service team.

We proudly use TNT, Star Track or Couriers Please depending on location.

RETURNS

You have 14 calendar days to return an item from the date you received it. Your item must be in the same condition that you received it. We appreciate if you can return your item in the original packaging. Your item needs to have the receipt or proof of purchase email. You must contact us before returning your item so that we can give you an RMA number and the most applicable shipping address based on your location. You can contact us at sales@gsasystems.com.au and we will respond promptly.

For more information, refer to our full policy.