Ubiquiti Nanostation Loco AC 5GHz 802.11ac MIMO antenna, WiFi Wireless Outdoor CPE, 10+ km (POE injector not included)
Rated 3.5/5 based on 11 customer reviews
  • Product SKU: NHU-NS-5ACL

Ubiquiti Nanostation Loco AC 5GHz 802.11ac MIMO antenna, WiFi Wireless Outdoor CPE, 10+ km (POE injector not included)

  • Access Point PtMP airMAX Mixed Mode
  • airMAX ac Protocol Support
  • Long-Range Point-to-Point (PtP) Link Mode
  • Selectable Channel Width
  • PtP: 10/20/30/40/50/60/80 MHz
  • PtMP: 10/20/30/40 MHz
  • Automatic Channel Selection
  • Transmit Power Control: Automatic/Manual
  • Automatic Distance Selection (ACK Timing)
  • Strongest WPA2 Security 
  • airMagic Channel Selection Tool
  • Dynamic Configuration Changes
  • Instant Input Validation
  • HTML5 Technology
  • Optimization for Mobile Devices
  • Detailed Device Statistics
  • Comprehensive Array of Diagnostic Tools, including RF Diagnostics and airView Spectrum Analyzer

NanoStation Loco 5ACClassic Nano Station design with updated proprietary airMAX ac chipset and dedicated management Wi-Fi for easy U Mobile app support and fast setup. Excellent solution for a simple PtP bridge or use as a PtMP station (CPE).New AntennaImproved DesignManagement WiFi Radio/U-Mobile AppAirOS v8.1 New UIHigh-performing The NanoStation Loco AC M5 is known for its much smaller size than the other NanoStation, which makes it ideal for residential or small building use. It has a good throughput of around 150 mbps, sufficient to cover multitudes of devices and users simultaneously. It has a great reach at 13dBi through its integrated antenna. It operates at a frequency of GHz, which is ideal if you want to maximize throughput. This signal is seldom interrupted by noise or clutter as most devices and appliances work on 2.4GHz frequency. AirMax The unit also makes use of the AirMax technology and its TDMA protocol. It lets you compartmentalize time schedules so youll be able to enjoy a smoother transmission and receipt of wireless connection. Moreover, you are also able to reduce latency, even if there are already a lot of devices that are connected into the network. It works very well along with quality of service so you can prioritize the allocation of the available bandwidth. NanoStation Loco AC M5 can be controlled via the software AirOS and AirController. Its a web-based management interface. PoE The NanoStation Loco AC M5 is also compatible with a PoE (power over Ethernet setup) so you can deal with fewer wires. Moreover, you can now reset its power directly from the main source than on the equipment itself, saving you the hassle.

The NanoStation AC and NanoStation AC loco represent the next evolution of the iconic CPE design that revolutionized the Wireless ISP industry.

  • Access Point PtMP airMAX Mixed Mode
  • airMAX ac Protocol Support
  • Long-Range Point-to-Point (PtP) Link Mode
  • Selectable Channel Width
  • PtP: 10/20/30/40/50/60/80 MHz
  • PtMP: 10/20/30/40 MHz
  • Automatic Channel Selection
  • Transmit Power Control: Automatic/Manual
  • Automatic Distance Selection (ACK Timing)
  • Strongest WPA2 Security 
  • airMagic Channel Selection Tool
  • Dynamic Configuration Changes
  • Instant Input Validation
  • HTML5 Technology
  • Optimization for Mobile Devices
  • Detailed Device Statistics
  • Comprehensive Array of Diagnostic Tools, including RF Diagnostics and airView Spectrum Analyzer

NanoStation Loco 5ACClassic Nano Station design with updated proprietary airMAX ac chipset and dedicated management Wi-Fi for easy U Mobile app support and fast setup. Excellent solution for a simple PtP bridge or use as a PtMP station (CPE).New AntennaImproved DesignManagement WiFi Radio/U-Mobile AppAirOS v8.1 New UIHigh-performing The NanoStation Loco AC M5 is known for its much smaller size than the other NanoStation, which makes it ideal for residential or small building use. It has a good throughput of around 150 mbps, sufficient to cover multitudes of devices and users simultaneously. It has a great reach at 13dBi through its integrated antenna. It operates at a frequency of GHz, which is ideal if you want to maximize throughput. This signal is seldom interrupted by noise or clutter as most devices and appliances work on 2.4GHz frequency. AirMax The unit also makes use of the AirMax technology and its TDMA protocol. It lets you compartmentalize time schedules so youll be able to enjoy a smoother transmission and receipt of wireless connection. Moreover, you are also able to reduce latency, even if there are already a lot of devices that are connected into the network. It works very well along with quality of service so you can prioritize the allocation of the available bandwidth. NanoStation Loco AC M5 can be controlled via the software AirOS and AirController. Its a web-based management interface. PoE The NanoStation Loco AC M5 is also compatible with a PoE (power over Ethernet setup) so you can deal with fewer wires. Moreover, you can now reset its power directly from the main source than on the equipment itself, saving you the hassle.

The NanoStation AC and NanoStation AC loco represent the next evolution of the iconic CPE design that revolutionized the Wireless ISP industry.

  • Access Point PtMP airMAX Mixed Mode
  • airMAX ac Protocol Support
  • Long-Range Point-to-Point (PtP) Link Mode
  • Selectable Channel Width
  • PtP: 10/20/30/40/50/60/80 MHz
  • PtMP: 10/20/30/40 MHz
  • Automatic Channel Selection
  • Transmit Power Control: Automatic/Manual
  • Automatic Distance Selection (ACK Timing)
  • Strongest WPA2 Security 
  • airMagic Channel Selection Tool
  • Dynamic Configuration Changes
  • Instant Input Validation
  • HTML5 Technology
  • Optimization for Mobile Devices
  • Detailed Device Statistics
  • Comprehensive Array of Diagnostic Tools, including RF Diagnostics and airView Spectrum Analyzer

Dimensions

  • 179 x 77.5 x 59.1 mm (7.05 x 3.05 x 2.33")

Weight

  • 180 g (6.35 oz)

Power Supply

  • 24V, 0.5A Gigabit PoE Supply* (Not included)

Max. Power Consumption

  • 8.5W

Power Method

  • Passive PoE (Pairs 4, 5+; 7, 8 Return)

Gain

  • 13 dBi

Networking Interface

  • 10/100/1000 Mbps Ethernet Port

Channel Bandwidths

  • 10/20/30/40/50/60/80 MHz

Processor Specs

  • Atheros MIPS 74Kc, 560 MHz

Memory

  • 64 MB DDR2

Cross-pol Isolation

  • 20 dB Minimum
  • Max. VSWR 1.8:1

Beamwidth

  • 45 degrees (H-pol) / 45 degrees (V-pol) / 45 degrees (Elevation)

Polarisation

  • Dual Linear

Enclosure

  • Outdoor UV Stabilized Plastic

LEDs

  • (1) Power

Mounting

  • Pole-Mount (Kit Included)

Operating Temperature

  • -40 to 70 C (-40 to 158 F)

Operating Humidity

  • 5 to 95% Noncondensing

RoHS Compliance

  • Yes

ESD/EMP Protection

  • ±24kV Contact/Air

Shock & Vibration

  • ETSI300-019-1.4

Certifications

  • CE, FCC, IC

Operating Frequency (MHz)

  • 5150 - 5875

Management Radio (MHz)

  • 2412 - 2472

 

Orders are processed: Monday to Friday from 9am – 5pm.

Orders are shipped within 24 hours of being placed.

Shipping Times: 

Within Victoria - Next day delivery

NSW Metro - Overnight service

NSW Country - 2-3 business days

QLD - 3-5 business days

SA - Overnight service

WA - 5 business days.

(Public Holidays Excluded)

Order Confirmation: After placing an order, you will receive an order confirmation by e-mail. This means we’ve received your order in our system and have pre-authorised your credit card for the purchase. If your item is unavailable, we will void the pre-authorisation charge and contact you to inform you by e-mail. If your item(s) are available for immediate shipment (within 2 business days), we will process the charges and submit the order for shipment.

Tracking Numbers will be sent to your email once your order has shipped.

In some cases, we may need to contact you before your order can be shipped. To ensure there is no delay, please respond to any email/phone call from our Customer Service team.

We proudly use TNT, Star Track or Couriers Please depending on location.

RETURNS

You have 14 calendar days to return an item from the date you received it. Your item must be in the same condition that you received it. We appreciate if you can return your item in the original packaging. Your item needs to have the receipt or proof of purchase email. You must contact us before returning your item so that we can give you an RMA number and the most applicable shipping address based on your location. You can contact us at sales@gsasystems.com.au and we will respond promptly.

For more information, refer to our full policy.