Tri Tech, Dual element PIR/Microwave, Outdoor, 15 x 15m coverage, 2.1 - 2.7m mount height, Weather resistant, IP54 rating, Fresnel optics 42 zone, 10-15V DC, 22mA
Rated 3.5/5 based on 11 customer reviews
  • Product SKU: OD850

Tri Tech, Dual element PIR/Microwave, Outdoor, 15 x 15m coverage, 2.1 - 2.7m mount height, Weather resistant, IP54 rating, Fresnel optics 42 zone, 10-15V DC, 22mA

  • Motion Analyzer II PIR signal processing
  • Linear travel distance (LTD) microwave signal processing
  • Two sensitivity levels
  • Timed relay output adjustable from two sec to 10 min
  • AND/OR mode
  • Draft and insect immunity
Available: In Stock
$0.00
We currently have 6 in stock.
Wishlist

The OD850 Series TriTech detectors are for use outdoors and in other harsh environments. They use a combination of passive- infrared (PIR) and microwave detection with advanced signal processing.

The detectors process PIR signals with Motion Analyzer II signal processing and microwave signals with Linear Travel Distance (LTD) signal processing. The detectors can distinguish between small, repetitive motions such as tree limbs moving in the wind and the more purposeful motions of intruders. These advanced processing techniques and the detectors' mechanical design combine to provide superior performance in a wide range of weather conditions.

The detectors have two user-selectable PIR sensitivity settings: Standard sensitivity is the recommended setting for a minimum of false alarms. The detector tolerates environment extremes on this setting. Intermediate sensitivity is the recommended setting for any location where an intruder is expected to cover only a small portion of the protected area. The detector tolerates normal environments on this setting. This setting identifies intruders more quickly, but may produce more false alarms.

  • Motion Analyzer II PIR signal processing
  • Linear travel distance (LTD) microwave signal processing
  • Two sensitivity levels
  • Timed relay output adjustable from two sec to 10 min
  • AND/OR mode
  • Draft and insect immunity

The OD850 Series TriTech detectors are for use outdoors and in other harsh environments. They use a combination of passive- infrared (PIR) and microwave detection with advanced signal processing.

The detectors process PIR signals with Motion Analyzer II signal processing and microwave signals with Linear Travel Distance (LTD) signal processing. The detectors can distinguish between small, repetitive motions such as tree limbs moving in the wind and the more purposeful motions of intruders. These advanced processing techniques and the detectors' mechanical design combine to provide superior performance in a wide range of weather conditions.

The detectors have two user-selectable PIR sensitivity settings: Standard sensitivity is the recommended setting for a minimum of false alarms. The detector tolerates environment extremes on this setting. Intermediate sensitivity is the recommended setting for any location where an intruder is expected to cover only a small portion of the protected area. The detector tolerates normal environments on this setting. This setting identifies intruders more quickly, but may produce more false alarms.

  • Motion Analyzer II PIR signal processing
  • Linear travel distance (LTD) microwave signal processing
  • Two sensitivity levels
  • Timed relay output adjustable from two sec to 10 min
  • AND/OR mode
  • Draft and insect immunity
Dimensions: 16.5 cm x 8.25 cm x 6.35 cm (6.5 in. x 3.25 in. x 2.5 in.)
Material: Polycarbonate
Properties: Weather and vandal resistant
Weight: 1.4 oz (40 g)
IP Rating: 54
Relative Humidity: 0% to 95% non-condensing
Temperature (Operating): -35°C to +54°C (-31°F to +130°F)
OD850-F2: Complies with Environmental Class III (EN50130-5)
Alarm: Do not use with capacitive or inductive loads. Form A: Normally-closed contact opens on alarm. Form C: Timed relay contact alternates state on alarm and follows an installer programmable timer. Contact Rating: 3 W, 125 mA maximum, 25 VDC maximum for DC resistive loads; and protected by a 4.7 Ω, ½ W resistor in the common C leg of the relay.
Tamper: Normally-closed (with cover on) contacts rated 125 mA maximum, 25 VDC maximum
Current: 62 mA maximum
Input Power: 10 VDC to 15 VDC at 22 mA standby.

 

Orders are processed: Monday to Friday from 9am – 5pm.

Orders are shipped within 24 hours of being placed.

Shipping Times: 

Within Victoria - Next day delivery

NSW Metro - Overnight service

NSW Country - 2-3 business days

QLD - 3-5 business days

SA - Overnight service

WA - 5 business days.

(Public Holidays Excluded)

Order Confirmation: After placing an order, you will receive an order confirmation by e-mail. This means we’ve received your order in our system and have pre-authorised your credit card for the purchase. If your item is unavailable, we will void the pre-authorisation charge and contact you to inform you by e-mail. If your item(s) are available for immediate shipment (within 2 business days), we will process the charges and submit the order for shipment.

Tracking Numbers will be sent to your email once your order has shipped.

In some cases, we may need to contact you before your order can be shipped. To ensure there is no delay, please respond to any email/phone call from our Customer Service team.

We proudly use TNT, Star Track or Couriers Please depending on location.

RETURNS

You have 14 calendar days to return an item from the date you received it. Your item must be in the same condition that you received it. We appreciate if you can return your item in the original packaging. Your item needs to have the receipt or proof of purchase email. You must contact us before returning your item so that we can give you an RMA number and the most applicable shipping address based on your location. You can contact us at sales@gsasystems.com.au and we will respond promptly.

For more information, refer to our full policy.