Radion Series, Wireless smoke detector, Built-in 85 dB sounder, LED/sounder status indicator, Suits RFRC-STR2, RF3212E & B810 receivers, 433MHz
Rated 3.5/5 based on 11 customer reviews
  • Product SKU: RFSM

Radion Series, Wireless smoke detector, Built-in 85 dB sounder, LED/sounder status indicator, Suits RFRC-STR2, RF3212E & B810 receivers, 433MHz

  • Externally visible LED that indicates smoke detector status
  • A built-in sounder for alarm alerts
  • Supervised for low-battery, cover tamper, and removal from mounting surface tamper conditions
  • Operational up to 5 years using two user replaceable CR123A Lithium batteries

RADION wireless security solution from Bosch provides the range, scalability and exceptional battery life required to ensure reliable performance and superior quality. Advanced diagnostics and multiple device enrollment options make installation and maintenance simple and cost effective. With a complete line of peripherals, RADION provides the flexibility for virtually any application requirement.

RADION smoke is a photoelectric wireless detector that transmits alarm signals to the wireless receiver when smoke is detected. RFSM-A version includes both rate of rise and fixed threshold temperature heat detection.

The detector’s built-in 85 dBA sounder initiates an alarm signal and an RF signal indicating the alarm condition is sent when the detector goes into alarm mode. The receiver signals the control panel identifying the specific detector in alarm. Alarm conditions are non-latching so if the alarm condition goes away (smoke dissipates), the detector returns to a normal state.

The photoelectric smoke detector continuously acquires ambient obscuration data as it monitors the surrounding environment. The red LED blinks every time a sample is taken. If any one sample is above the calibrated alarm threshold, two more samples are taken at 4 second intervals. If all three samples are above the calibrated alarm threshold, the detector goes into alarm mode.

  • Externally visible LED that indicates smoke detector status
  • A built-in sounder for alarm alerts
  • Supervised for low-battery, cover tamper, and removal from mounting surface tamper conditions
  • Operational up to 5 years using two user replaceable CR123A Lithium batteries

RADION wireless security solution from Bosch provides the range, scalability and exceptional battery life required to ensure reliable performance and superior quality. Advanced diagnostics and multiple device enrollment options make installation and maintenance simple and cost effective. With a complete line of peripherals, RADION provides the flexibility for virtually any application requirement.

RADION smoke is a photoelectric wireless detector that transmits alarm signals to the wireless receiver when smoke is detected. RFSM-A version includes both rate of rise and fixed threshold temperature heat detection.

The detector’s built-in 85 dBA sounder initiates an alarm signal and an RF signal indicating the alarm condition is sent when the detector goes into alarm mode. The receiver signals the control panel identifying the specific detector in alarm. Alarm conditions are non-latching so if the alarm condition goes away (smoke dissipates), the detector returns to a normal state.

The photoelectric smoke detector continuously acquires ambient obscuration data as it monitors the surrounding environment. The red LED blinks every time a sample is taken. If any one sample is above the calibrated alarm threshold, two more samples are taken at 4 second intervals. If all three samples are above the calibrated alarm threshold, the detector goes into alarm mode.

  • Externally visible LED that indicates smoke detector status
  • A built-in sounder for alarm alerts
  • Supervised for low-battery, cover tamper, and removal from mounting surface tamper conditions
  • Operational up to 5 years using two user replaceable CR123A Lithium batteries
Dimensions 142 mm x 61 mm (5.6 in x 2.4 in)
Power/Voltage Two CR123A Lithium battery, 3 VDC
Battery life Up to 5 years
Sensitivity 0.10 to 0.18dB/m (0.71 to 1.25%/ft.)
Temperature 0゚C to +49゚C (+32゚F to +120゚F)
Relative humidity Up to 93% non-condensing
Cover and wall tamper switch Transmits a tamper switch signal when the unit is removed from its base, or the unit is pulled away from the mounting surface.
Drift compensation 1.64%/m (0.5%/ft) maximum
Sounder 85 dBA at 3 m
Frequency 433.42 MHz
Use Intended for indoor use
Receivers RFRC-OPT wireless option bus receiver RFRC-STR wireless streamline bus interface RFRC-STR2 wireless streamline bus interface AU RF3212E wireless streamline bus interface RF3222E wireless multiplex bus interface

 

Orders are processed: Monday to Friday from 9am – 5pm.

Orders are shipped within 24 hours of being placed.

Shipping Times: 

Within Victoria - Next day delivery

NSW Metro - Overnight service

NSW Country - 2-3 business days

QLD - 3-5 business days

SA - Overnight service

WA - 5 business days.

(Public Holidays Excluded)

Order Confirmation: After placing an order, you will receive an order confirmation by e-mail. This means we’ve received your order in our system and have pre-authorised your credit card for the purchase. If your item is unavailable, we will void the pre-authorisation charge and contact you to inform you by e-mail. If your item(s) are available for immediate shipment (within 2 business days), we will process the charges and submit the order for shipment.

Tracking Numbers will be sent to your email once your order has shipped.

In some cases, we may need to contact you before your order can be shipped. To ensure there is no delay, please respond to any email/phone call from our Customer Service team.

We proudly use TNT, Star Track or Couriers Please depending on location.

RETURNS

You have 14 calendar days to return an item from the date you received it. Your item must be in the same condition that you received it. We appreciate if you can return your item in the original packaging. Your item needs to have the receipt or proof of purchase email. You must contact us before returning your item so that we can give you an RMA number and the most applicable shipping address based on your location. You can contact us at sales@gsasystems.com.au and we will respond promptly.

For more information, refer to our full policy.