Plug-In Rate-of-rise & Fixed heat detector (63°C)
Rated 3.5/5 based on 11 customer reviews
  • Product SKU: 5151RAUS

Plug-In Rate-of-rise & Fixed heat detector (63°C)

  • Low standby current
  • Two visible LEDs "blink" in standby and provide a 360deg field viewing angle
  • Detector head plugs easily into base
  • Built-in test switch
  • Wide variety of mounting bases with built-in shorting spring

The 5151 Series are conventional 2‐wire fire heat detectors. These detectors are designed to provide open area protection when used with compatible Control & Indicating Equipment (CIE). These detectors are designed and manufactured to comply with AS7240.5‐2004.    Two LEDs on each detector provide local 360° visible alarm indication. They blink every ten seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will stop blinking when a trouble condition exists indicating that the detector sensitivity is outside the listed limits. Remote LED annunciator capability is standard and may be implemented through an optional accessory RA100Z. The alarm can be reset only by a momentary power interruption. This detector may be tested by activating the internal reed switch with a magnet.

The detector initiates an alarm in response to both rapid rate-of-rise conditions and fixed heat. This enables the heat detector to communicate an alarm to the central control panel prior to reaching its fixed set point for high rates of rise, providing a timely response to both rapid and slow temperature increases.

  • Low standby current
  • Two visible LEDs "blink" in standby and provide a 360deg field viewing angle
  • Detector head plugs easily into base
  • Built-in test switch
  • Wide variety of mounting bases with built-in shorting spring

The 5151 Series are conventional 2‐wire fire heat detectors. These detectors are designed to provide open area protection when used with compatible Control & Indicating Equipment (CIE). These detectors are designed and manufactured to comply with AS7240.5‐2004.    Two LEDs on each detector provide local 360° visible alarm indication. They blink every ten seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will stop blinking when a trouble condition exists indicating that the detector sensitivity is outside the listed limits. Remote LED annunciator capability is standard and may be implemented through an optional accessory RA100Z. The alarm can be reset only by a momentary power interruption. This detector may be tested by activating the internal reed switch with a magnet.

The detector initiates an alarm in response to both rapid rate-of-rise conditions and fixed heat. This enables the heat detector to communicate an alarm to the central control panel prior to reaching its fixed set point for high rates of rise, providing a timely response to both rapid and slow temperature increases.

  • Low standby current
  • Two visible LEDs "blink" in standby and provide a 360deg field viewing angle
  • Detector head plugs easily into base
  • Built-in test switch
  • Wide variety of mounting bases with built-in shorting spring
  • Diameter: 10.2 cm (4")
  • Height: 4.8 cm (1.8")
  • Weight: 80g
  • Operating Voltage: 8.5‐35 VDC
  • Standby Current: 30μA
  • Alarm Current: 10mA (Min.) 130mA (Max.) Must be limited by control panel.
  • Operating Temperature Range 5151RAUS and 5151AUS 5151RHAUS and 5151HAUS: ‐10°C to 50°C
  • Operating Humidity: ‐10°C to 80°C
  • Latching Alarm: 95%RH noncondensing (Max. )

 

Orders are processed: Monday to Friday from 9am – 5pm.

Orders are shipped within 24 hours of being placed.

Shipping Times: 

Within Victoria - Next day delivery

NSW Metro - Overnight service

NSW Country - 2-3 business days

QLD - 3-5 business days

SA - Overnight service

WA - 5 business days.

(Public Holidays Excluded)

Order Confirmation: After placing an order, you will receive an order confirmation by e-mail. This means we’ve received your order in our system and have pre-authorised your credit card for the purchase. If your item is unavailable, we will void the pre-authorisation charge and contact you to inform you by e-mail. If your item(s) are available for immediate shipment (within 2 business days), we will process the charges and submit the order for shipment.

Tracking Numbers will be sent to your email once your order has shipped.

In some cases, we may need to contact you before your order can be shipped. To ensure there is no delay, please respond to any email/phone call from our Customer Service team.

We proudly use TNT, Star Track or Couriers Please depending on location.

RETURNS

You have 14 calendar days to return an item from the date you received it. Your item must be in the same condition that you received it. We appreciate if you can return your item in the original packaging. Your item needs to have the receipt or proof of purchase email. You must contact us before returning your item so that we can give you an RMA number and the most applicable shipping address based on your location. You can contact us at sales@gsasystems.com.au and we will respond promptly.

For more information, refer to our full policy.