Glass break sensor, Round enclosure, Suits most plate, laminated, tempered and wired glass, Up to 7.6m range for glass sizes over 30.5 x 30.5cm, Wall or ceiling mount
Rated 3.5/5 based on 11 customer reviews
  • Product SKU: DS1101i

Glass break sensor, Round enclosure, Suits most plate, laminated, tempered and wired glass, Up to 7.6m range for glass sizes over 30.5 x 30.5cm, Wall or ceiling mount

  • Automatic environmental test circuitry
  • Sound check
  • Microprocessor-based sound analysis technology (SAT)
Available: In Stock
$0.00
Wishlist

The DS1100i Detector Series uses micro-processor based sound analysis technology (SAT) to listen for the specific frequencies associated with breaking glass. The DS1101i, DS1101i‑BEL, DS1101i‑CHI, and DS1101i‑FRA can be used to detect breakage of plate, tempered, laminated and wired glass types. A built-in environmental test feature alerts the installer to false alarm hazards in harsh environments. The round detectors mount on the ceiling or walls.

Audio signals are analyzed using microprocessor-based SAT and must produce specific frequency, signature, and timing relationships to cause an alarm. The sophistication of this processing technique ensures proper catch performance while eliminating false alarms.

The magnet‑operated test mode provides a location verification and operational test when using the optional DS1110i Glassbreak Tester. The test mode also includes an environmental test that alerts the installer to possible false alarm sources caused by ambient noise. The automatic sound check feature allows the end user to verify that the detector is powered and functioning by clapping his hands. An externally‑visible alarm LED indicates an alarm or test condition and can be programmed to latch if desired.

  • Automatic environmental test circuitry
  • Sound check
  • Microprocessor-based sound analysis technology (SAT)

The DS1100i Detector Series uses micro-processor based sound analysis technology (SAT) to listen for the specific frequencies associated with breaking glass. The DS1101i, DS1101i‑BEL, DS1101i‑CHI, and DS1101i‑FRA can be used to detect breakage of plate, tempered, laminated and wired glass types. A built-in environmental test feature alerts the installer to false alarm hazards in harsh environments. The round detectors mount on the ceiling or walls.

Audio signals are analyzed using microprocessor-based SAT and must produce specific frequency, signature, and timing relationships to cause an alarm. The sophistication of this processing technique ensures proper catch performance while eliminating false alarms.

The magnet‑operated test mode provides a location verification and operational test when using the optional DS1110i Glassbreak Tester. The test mode also includes an environmental test that alerts the installer to possible false alarm sources caused by ambient noise. The automatic sound check feature allows the end user to verify that the detector is powered and functioning by clapping his hands. An externally‑visible alarm LED indicates an alarm or test condition and can be programmed to latch if desired.

  • Automatic environmental test circuitry
  • Sound check
  • Microprocessor-based sound analysis technology (SAT)
Current: 23 mA at 12 VDC
Voltage: 6 VDC to 15 VDC
Operating Temperature: -29°C to +49°C (-20°F to +120°F) For UL Certificated installations, 0°C to +49°C (+32°F to +120°F)
Radio Frequency Interference (RFI) Immunity: No alarm or setup on critical frequencies in the range from 26 MHz to 950 MHz at 50 V/m.
Dimensions (HxDiameter): 2.1 cm x 8.6 cm (0.83 in. x 3.4 in.)
Material: High‑impact ABS plastic enclosure
Alarm: Form C reed relay rated 3.5 W, 125 mA at 28 VDC for resistive loads.
Tamper: Normally-closed (NC) cover‑activated tamper switch with separate terminals. Contacts rated at 28 VDC, 125  mA maximum.

 

Orders are processed: Monday to Friday from 9am – 5pm.

Orders are shipped within 24 hours of being placed.

Shipping Times: 

Within Victoria - Next day delivery

NSW Metro - Overnight service

NSW Country - 2-3 business days

QLD - 3-5 business days

SA - Overnight service

WA - 5 business days.

(Public Holidays Excluded)

Order Confirmation: After placing an order, you will receive an order confirmation by e-mail. This means we’ve received your order in our system and have pre-authorised your credit card for the purchase. If your item is unavailable, we will void the pre-authorisation charge and contact you to inform you by e-mail. If your item(s) are available for immediate shipment (within 2 business days), we will process the charges and submit the order for shipment.

Tracking Numbers will be sent to your email once your order has shipped.

In some cases, we may need to contact you before your order can be shipped. To ensure there is no delay, please respond to any email/phone call from our Customer Service team.

We proudly use TNT, Star Track or Couriers Please depending on location.

RETURNS

You have 14 calendar days to return an item from the date you received it. Your item must be in the same condition that you received it. We appreciate if you can return your item in the original packaging. Your item needs to have the receipt or proof of purchase email. You must contact us before returning your item so that we can give you an RMA number and the most applicable shipping address based on your location. You can contact us at sales@gsasystems.com.au and we will respond promptly.

For more information, refer to our full policy.