Cable 4 Pair Cat6 Jel Filled PE 305M
Rated 3.5/5 based on 11 customer reviews
  • Product SKU: UTPL6JFBK305

Cable 4 Pair Cat6 Jel Filled PE 305M

  • 305m Cat6 Black UTP Gel Filled Solid Cable Roll 250MHz
  • 100% Bare Copper Cable
  • 23AWGx4P
  • PE Jacket
  • Unterminated
  • Bare Copper / 23AWG
  • Impedance Matched - providing high speed, error-free transmission
  • 23AWG Solid Copper Conductors
  • Metre marked Black UV stabilised jacket

Category cables are designed to carry high bit rate signals in LAN (Local Area Network) based systems using Ethernet protocols defined by IEEE. Originally designed to operate at 1 MB these systems have evolved over time to the point where they are now able to communicate at bit rates of 1000 MB (also called Gigabit-Ethernet) and above. Category cables are often employed in a STAR network topology. Such cabling is often referred to as Structured Cabling or Structured Wiring and involves using fixed solid conductor cable in horizontal runs radiating from a central MDF to workstation outlets. Category patch cable that has stranded conductors is then used for the last 5 metres of the run to connect the work outlet to the computer or workstation. Standards such as AS/NZS 3080, ISO 11801 and EIA/TIA 568 specify the requirements for the cable and the subsequent channel or link. Typical protocols include 1Base5 (IEEE 802.3e), 10Base-T (IEEE 802.3i), 100Base-TX (IEEE 802.3u) and 1000Base-T (IEEE 802.3ab).
Garland category cable is designed to meet or exceed the necessary standards with many of the products being third part verified for performance by UL or ETL. Category 5E horizontal cables carry the UTPL5E insignia and are available in PVC (standard indoor), Halogen Free (“HF” suffix) and Jelly Filled versions (“JF” suffix) for outdoor and underground installations. Category 6 cables carry the UTPL6 insignia and are also available in the same options. Stranded versions (“MTP” suffix) are available in PVC or halogen free jacket options only.

  • 305m Cat6 Black UTP Gel Filled Solid Cable Roll 250MHz
  • 100% Bare Copper Cable
  • 23AWGx4P
  • PE Jacket
  • Unterminated
  • Bare Copper / 23AWG
  • Impedance Matched - providing high speed, error-free transmission
  • 23AWG Solid Copper Conductors
  • Metre marked Black UV stabilised jacket

Category cables are designed to carry high bit rate signals in LAN (Local Area Network) based systems using Ethernet protocols defined by IEEE. Originally designed to operate at 1 MB these systems have evolved over time to the point where they are now able to communicate at bit rates of 1000 MB (also called Gigabit-Ethernet) and above. Category cables are often employed in a STAR network topology. Such cabling is often referred to as Structured Cabling or Structured Wiring and involves using fixed solid conductor cable in horizontal runs radiating from a central MDF to workstation outlets. Category patch cable that has stranded conductors is then used for the last 5 metres of the run to connect the work outlet to the computer or workstation. Standards such as AS/NZS 3080, ISO 11801 and EIA/TIA 568 specify the requirements for the cable and the subsequent channel or link. Typical protocols include 1Base5 (IEEE 802.3e), 10Base-T (IEEE 802.3i), 100Base-TX (IEEE 802.3u) and 1000Base-T (IEEE 802.3ab).
Garland category cable is designed to meet or exceed the necessary standards with many of the products being third part verified for performance by UL or ETL. Category 5E horizontal cables carry the UTPL5E insignia and are available in PVC (standard indoor), Halogen Free (“HF” suffix) and Jelly Filled versions (“JF” suffix) for outdoor and underground installations. Category 6 cables carry the UTPL6 insignia and are also available in the same options. Stranded versions (“MTP” suffix) are available in PVC or halogen free jacket options only.

  • 305m Cat6 Black UTP Gel Filled Solid Cable Roll 250MHz
  • 100% Bare Copper Cable
  • 23AWGx4P
  • PE Jacket
  • Unterminated
  • Bare Copper / 23AWG
  • Impedance Matched - providing high speed, error-free transmission
  • 23AWG Solid Copper Conductors
  • Metre marked Black UV stabilised jacket
General
Pack Size 305m
Applicable Standards AS/ACIF S008, UL444, TIA/EIA 568 C.2
Suitable Applications For communication network applications needing up to gigabit networking speeds.
No. Pairs 4
Conductor Characteristics
AWG 23
Stranding (mm) 1/0.57
Area (mm2) 0.255
Diameter (mm) 0.57
Material BC
Insulation
Material PE
Nominal Thickness (mm) 0.22
Nominal OD (mm) 1.025
Filler
Material Jelly Filled
Outer Sheath
Material PE
Colour Black
Nominal Thickness (mm) 1
Nominal OD (mm) 7.3
Physical Characteristics
Insulation – Elongation at BBA >300%
Outer Sheath – Elongation at BBA >400%
Electrical Properties
Max. Conductor DC Resistance @ 20°C 86Ω/km
Max. Mutual Capacitance @ 1KHz 56 pF/m
Max. Pair-pair capacitance unbalance 330 pF/100m
Nom. Characteristic Impedance @ 1MHz 100±15Ω
Min. Insulation Resistance @ 20°C 10000MΩ.km
Voltage Test: Conductor to core 2.0 KV ac/1min
Voltage Test: Core to sheath 4.5 KV ac/1min
Mechanical Properties
Operating Temp Range -15 to 70°C
Max. Recommended Pulling Tension 143 N
Min Bend Radius (Install) 91mm
Approximate Mass(kgs/100m) 8.0 kg/100m

 

Orders are processed: Monday to Friday from 9am – 5pm.

Orders are shipped within 24 hours of being placed.

Shipping Times: 

Within Victoria - Next day delivery

NSW Metro - Overnight service

NSW Country - 2-3 business days

QLD - 3-5 business days

SA - Overnight service

WA - 5 business days.

(Public Holidays Excluded)

Order Confirmation: After placing an order, you will receive an order confirmation by e-mail. This means we’ve received your order in our system and have pre-authorised your credit card for the purchase. If your item is unavailable, we will void the pre-authorisation charge and contact you to inform you by e-mail. If your item(s) are available for immediate shipment (within 2 business days), we will process the charges and submit the order for shipment.

Tracking Numbers will be sent to your email once your order has shipped.

In some cases, we may need to contact you before your order can be shipped. To ensure there is no delay, please respond to any email/phone call from our Customer Service team.

We proudly use TNT, Star Track or Couriers Please depending on location.

RETURNS

You have 14 calendar days to return an item from the date you received it. Your item must be in the same condition that you received it. We appreciate if you can return your item in the original packaging. Your item needs to have the receipt or proof of purchase email. You must contact us before returning your item so that we can give you an RMA number and the most applicable shipping address based on your location. You can contact us at sales@gsasystems.com.au and we will respond promptly.

For more information, refer to our full policy.